Showing posts with label LTE. Show all posts
Showing posts with label LTE. Show all posts

Thursday, December 29, 2011

The Next Decade of Bandwidth - Part IV

It won’t be long until wireless broadband has commandeered all the spectrum it can between a few hundred and a few thousand MHz. These are seen by the industry as being the most desirable frequencies. They offer high bandwidth capacity, good penetration into buildings and small antennas. Unfortunately, there are only so many of these channels available. Just like in real estate, when all the best locations are bought up expansion continues into whatever is available.

The future of computing is in the cloud...Going up or down the electromagnetic spectrum in search of more broadband capacity has its challenges. As you go down in frequency, up in wavelength, channels have to be proportionally larger to get the same carrying capacity. A 1 MHz channel at 10 GHz seems small. A 1 MHz channel at 10 MHz eats up a huge chunk of that band. At 1 MHz, there would only be room for a single 1 MHz channel.

One way to deal with this is to divvy up your transmissions into hundreds or thousands of smaller channels. This is the principle behind OFDM or Orthogonal Frequency Division Multiplexing. The system generates an array of carriers spaced out across the available spectrum. Each carrier transmits only a portion of the data. When those pieces are combined at the far end, you have a single continuous transmission again.

OFDM is the system used for BPL or Broadband over Power Line Internet services. It uses the shortwave frequencies, with some carriers omitted to avoid interference with other services. By using many, many small channels instead of one big one, any packet losses are small and easily replaced. It also offers a way to fit a wireless service into a band that doesn’t have big open chunks of spectrum. Just use the channels you can and combine a bunch of them to create a larger bandwidth service.

BPL may not be going anywhere because other wireline and wireless services are more cost effective competitors. WiMAX uses OFDM, as do LTE, WiFi and digital radio broadcasting. Seems like there is no reason a wireless equivalent of BPL couldn’t be deployed to use available lower frequencies that haven’t been previously considered for broadband use.

Going up the spectrum in frequency is also challenging. The higher you go, the more line of sight transmission becomes. The Ku band that broadcast satellites use from 12 to 18 GHz has lots of capacity, but not much ability to penetrate obstacles. Even tree leaves will interrupt service, as will a heavy rain. Wireless point to point transmissions in the Super and Extremely High Frequency bands is via outdoor antennas within line of sight.

That’s the state of the art today, but does it need to be so limited? Perhaps someone will come up with a way to flood areas with many very low power cells to ensure that a mobile antenna can receive a signal no matter where it travels. That same idea is being put to use now with mesh networks consisting of WiFi radios. Each WiFi hotspot communicates with the radios nearby to share traffic, so you don’t need backhaul connections to a central controller.

This idea of mesh networks with low power transmissions and short range coverage has application for even higher parts of the spectrum. Above 300 GHz, electromagnetic waves start to be called infrared light waves. Infrared light is the carrier used in fiber optic cables. You can eliminate the fiber and use infrared beams from point to point, as long as you have a direct line of sight. This is called free space optical transmission. With enough emitters and receivers connected in a mesh network, you can create a very high capacity network with decent coverage.

In Part I, Part II, Part III, and Part IV, we’ve seen how wireless broadband has a near insatiable need for bandwidth and how that may be satisfied by reassignment of desirable channels and more efficient use of underutilized frequencies up and down the electromagnetic spectrum. In the fifth and final part of this series on the next decade of bandwidth, we’ll take a look at wired connections that include both copper and fiber to see what else is in store for business bandwidth.

Is your business running short on bandwidth or simply looking to get a better deal? See what's available for your business location in the way of T-carrier and Ethernet copper, SONET and Ethernet fiber, fixed wireless and Hybrid Fiber Cable (HFC). Get instant bandwidth pricing up to 1 Gbps and fast quotes on other services.

Click to check pricing and features or get support from a Telarus product specialist.




Follow Telexplainer on Twitter

Monday, July 25, 2011

4G Wireless Broadband Options

Wireless broadband is on an upward path to take over many of the applications that have long been the domain of wireline technologies. Wireless has the convenience of portability and mobility. What’s held back deployment and more powerful applications is the limited availability and speed of wireless connections. The move to 4G wireless looks to be a potential solution.

Wireless towers deliver 3G and 4G broadband for mobile and fixed applications...4G or fourth generation wireless doesn’t have a strict definition, but it is roughly stated as the bandwidth typical of Cable broadband or Ethernet over Copper business connections. With this level of transmission speed and a city-wide reach, 4G wireless can take over service for desktop as well as mobile devices.

One might throw WiFi into the 4G category. The bandwidth for a, b, g, and n WiFi technologies fall into the right bandwidth category. However, WiFi is a short distance system. It works well within and nearby particular locations, such as homes, offices, restaurants, hotels, airports and even park benches. But you can’t get in your car and drive away with a WiFi connection. It will disappear as soon as you leave the parking lot. In a way, WiFi is more of a PAN or Personal Area Network like Bluetooth.

The higher power wireless technologies, including 2G & 3G are associated with cellular phone service. These are based on using networks of fixed transmitters and receivers arranged as cells with signals that fill-in the coverage between towers. The trick of turning this system into a metropolitan or wide area network is to coordinate the handoff of an existing wireless connection as the user moves from cell to cell.

The most popular wireless technology right now is 3G. It offers bandwidths similar to T1 lines and basic DSL of around 1.5 Mbps on average in metropolitan areas. You may get two or more times this speed if you happen to be near a tower with few users. This is more than adequate for many mobile uses, such as Web browsing, email and viewing video clips on smartphone screens.

Beyond limited speed, 3G also suffers from limited bandwidth availability. It shares channels with cellular telephone on the same towers. Those channels were originally sized to support expected voice traffic. They’ve been overwhelmed by the higher bandwidth requirements of Internet data traffic. That’s why carriers are so insistent on bandwidth caps.

There are a couple of different approaches to 4G wireless. The one taken by the cell phone companies is to view 4G as an upgrade to their 3G systems. There are two differing cellular system that co-exist. One is a US-centric system called CDMA that is used by Verizon, Sprint and others. The other is a more global standard called GSM that is used by AT&T and T-Mobile.

Right now, AT&T and T-Mobile have upgraded their 3G networks to a faster version of the same thing called HSPA+ that delivers up to 6 to 8 Mbps. Verizon has moved to a 4G technology called LTE that offers downloads of 5 to 12 Mbps. Sprint has gone with another 4G technology called WiMAX that delivers downloads in the 3 to 6 Mbps speed range.

As wireless continues to evolve, 4G is expected to move into two camps. LTE is the technology most discussed as a truly universal standard. WiMAX deployment actually predated LTE and has installations worldwide. Both LTE and WiMAX have technical upgrade paths that can boost download speeds to over 100 Mbps and even 1000 Mbps. This is competitive with many fiber services and ensures that 4G wireless will be with us for a long time.

One thing we’re also seeing with 4G wireless is the use of lower frequency bands that can more easily penetrate buildings. These bands came from the re-deployment of those channels from UHF TV as part of a federal auction. Clear offers 4G fixed and mobile wireless service with a telephone option over WiMAX in over 80 cities nationwide. Right now, this service offers unlimited broadband service.



Follow Telexplainer on Twitter

Sunday, October 17, 2010

MiFi Points The Way to Wireless Transition

Verizon Wireless just made an amazing announcement. They will be selling the Apple iPad in their stores. But aren’t Apple and AT&T exclusive partners? Indeed. So, why is Verizon selling a product that won’t work on their network? ...Or will it?

Verizon MiFi. Click to find service.Yes, it will. How Verizon accomplished this clever feat of engineering points the way to the future of wireless broadband. Actually, not the future future. Just the immediate future. Call it the era of wireless transition.

Wireless technology has pretty much developed along two lines. One is the telecom carriers, including AT&T, Verizon, Sprint and T-Mobile. There are other players in the cellular wireless game, but they are simply private branded versions of the big four within the US. What characterizes the major carriers is that their offerings are proprietary. What works on AT&T won’t work on Verizon Wireless, and vice versa.

The other wireless path is an industry standard known a WiFi. It comes in flavors such as a, b, g, and n. But unlike telecom carrier services there is enough commonality and backwards compatibility that pretty much any WiFi device will work on pretty much any wireless router, hotspot or access point.

What Verizon has cleverly done is marry the two lines. They can’t get into the iPad through the front door, so the come in the back door. How? Very simple. They use an interface device to convert cellular to WiFi. That device is the MiFi. The Verizon MiFi is a little box about the size of a pack of cards. Inside is a cellular radio, a WiFi radio, a battery and some circuitry to make it all work. All you do is push a button to turn it on and the converter works automatically. It allows up to 5 wireless devices to gain access to the Verizon 3G wireless network as if they were Verizon-enabled to begin with.

The Verizon iPad will consist of an Apple iPad and a Verizon MiFi bundled together. They are separate pieces of equipment, but the MiFi will slip into your pocket or bag so it isn’t intrusive. At first blush, it may seem like having to carry around two pieces of equipment instead of just one is a big disadvantage for Verizon compared to AT&T. But Verizon may get the last laugh after all. The MiFi provides 3G connectivity for your iPad, but it also provides 3G connectivity for your other devices that don’t have their own 3G service built-in. That includes your laptop computer, netbook, games, and even your Apple iPod. If you had to buy separate 3G service for each device, you’d go broke. But one MiFi can serve whatever gadgets need connectivity, as long as they are WiFi enabled.

Verizon isn’t the only one with a MiFi. Novatel, maker of the MiFi, offers an unlocked version for GSM carriers AT&T and T-Mobile. There’s a MiFi specifically for Virgin Mobile. Sprint goes one further with their Sierra Wireless Overdrive 3G/4G Mobile Hotspot. It works on both the Sprint 3G Mobile Broadband network and its 4G WiMAX network. CLEAR offers a similar 3G/4G converter called Clear Spot.

Even these converters are transitional technology. Smartphones, starting with the Droid X by Motorola and Samsung Epic, have the cellular to WiFi hotspot capability built-in. This is likely to become a standard feature on smartphone designs, as WiFi and Bluetooth are the industry standard wireless technologies. WiFi has the greater transmission range.

Down the road a few years, the tide of wireless seems to be going in the direction of standardizing on LTE as a 4G standard. Cellular phone may give way to VoIP over LTE. At that point it will be hard to tell the difference between a mobile phone, a smartphone and a digital device like a tablet computer. Perhaps a single smart radio chip will provide universal wireless connectivity. Just pick your carrier and sign up for a service plan after you buy the device. The wireless transition era will be complete.



Follow Telexplainer on Twitter

Wednesday, April 28, 2010

What is 4G and Why Do You Want It?

You see ads for 3G cell phones and wireless modem aircards. Now here comes 4G. What is this advance in technology all about and why should you want it now?

4G wireless broadband2G, 3G, 4G. All those G’s, what do they mean? What we’re talking about is a shorthand for the generations of wireless broadband service. It’s been advancing so fast that it’s not unusual for different generations of service to be available in the same area. That’s by design. If you are in a weak service area for 3G, then your device will automatically seek out a lower speed service such as 2.5G or 2G. You won’t get as high a bandwidth, but at least you’ll be connected.

Wireless broadband is generally a companion service to cellular telephone. It uses the same towers and base stations. Coverage areas are pretty much the same. The exception is when a particular tower site hasn’t yet been upgraded to the latest cellular broadband generation. In that case, you’ll get a lower level of service until you move into the coverage of a cell tower that is at the latest standard.

I should mention here that there are two wireless broadband services that have nothing to do with cell phones. One is the WISP or Wireless Internet Service Provider that offers home and business broadband. You need to be within line of site of their tower and install an outdoor antenna on your roof. These WISPs are pretty much locally owned an operated, and generally serve locations that aren’t wired for DSL or Cable.

The other non-cellular wireless service is the WiFi hotspot. There are so many of them, that they could almost form a cellular-like network of their own. That hasn’t happened because hotspots are also largely local services, mostly offered by restaurants and hotels. There’s no network to tie them together, so once you leave a hotspot you have to log into another one at your next stop.

That’s where 4G steps in. Imagine that you are connected to a 4G service and are reading a document while parked in your car. You can go into a client’s office or your own and you’ll still be on the same service. The idea of 4G is to blanket a city with a signal strong enough that you have high bandwidth connectivity without worrying about where you are located.

But doesn’t 3G do that? To some extent, yes. But 4G has the advantage of higher bandwidths. With the 4G service that is available today using the WiMAX standard, you can get 3 to 6 Mbps on a normal basis, with bursts of to 10 Mbps.

WiMAX 4G is also not limited to mobile service the way that 2G and 3G are. It’s designed for both desktop and mobile service. That puts this 4G network in a class by itself. You can get a WiMAX modem for your desktop computer and a plug-in 4G aircard for your laptop computer. You’ll have the same service at your desk as you do on the road. There are even 4G phones coming out sometime this summer that look to become a game changer in the wireless service industry.

There are two standards that will dominate 4G service. One is LTE which will be deployed later this year and through 2011. The other is WiMAX broadband that is available now in many cities and states. Find out if your location qualifies for 4G wireless broadband
now.



Follow Telexplainer on Twitter

Tuesday, April 20, 2010

3G 4G Mobile Bandwidth

The Internet long escaped the desktop and moved onto the mobile phone. The problem is that it has been following a similar learning curve that took us from 300 baud telephone modems to DSL & Cable broadband and now to high speed wireless and fiber optic service. Mobile bandwidth is undergoing a steady evolution, with the demand for higher and higher speeds pushing the technology. Let’s have a look at what’s available and what’s coming soon.

3G and 4G Mobile Bandwidth OptionsThe benchmark today is 3G wireless. This service offers somewhere between 500 Kbps and 1.5 Mbps and is owned and operated by the cellular carriers. The same company that sells you your cell phone minutes also sells you 3G wireless Internet access. The signals come from the same towers, so if you are in a dead spot for phone reception you won’t be surfing the Web or watching videos either.

The 3G build-out has been proceeding at something of a panic level, especially since the introduction of the Apple iPhone. The first iPhone used the AT&T EDGE network, which is actually called a 2.5G network. That means it has considerably less bandwidth than the newer HSPA or High Speed Packet Access 3G network, perhaps as little as a tenth as much. HSPA is offered by GSM carriers AT&T and T-Mobile and is also known as HSUPA.

A competing 3G service is offered by CDMA carriers Verizon and Sprint using a different technology. Theirs is known as EV-DO and EV-DO Rev A. Download bandwidths are in the range of 1 to 2 Mbps, depending on signal conditions.

Note that 2.5G and 3G cellular broadband not only gives cell phones the ability to download videos and surf the Web but also gives you the option of adding 3G to your laptop computer. The functionality is added using a plug-in wireless modem aircard. These are sold with data-only service plans, since they don’t work as telephones. The aircard and wireless service has been a boon to field sales people who don’t always have the ability to set up shop within a WiFi hotspot.

The newest service on the market is called 4G mobile bandwidth. Right now the run away leader is the WiMAX service offered by Clearwire and Sprint under the CLEAR trademark. WiMAX is yet another wireless standard, albeit a global one not associated with the cellular phone system. WiMAX offers a powerful signal that covers an entire city. It’s strong enough to penetrate buildings so that you can have the same WiMAX broadband on your desktop and laptop computers. Download bandwidth typically ranges between 3 and 6 Mbps, considerably faster than 3G networks.

The cellular companies aren’t sitting still, though. Both AT&T and Verizon plan to deploy another standard called LTE to compete with WiMAX. It will likely be a year or two before these two 4G technologies are competing head to head in most populated areas. For now, WiMAX gives you the most mobile bandwidth at the lowest cost in the cities and states where it is available.



Follow Telexplainer on Twitter

Thursday, February 11, 2010

The Fiber Gold Rush Is On

We’ve known for some time that ultimately we’d need to move from copper wires to fiber optic strands to get the bandwidth we’ll need as technology advances. Internet service providers, Cable TV companies, medical centers, telephone switching offices and major corporations have gradually embraced this move over the last couple of decades. New services, such as Metro Ethernet, have made fiber optic connections affordable for even mid-size companies. Small businesses and consumers are now getting their turn.

The road to riches may be paved with fiber this time.Indeed, there has been one company that saw the light, so to speak, on fiber to the home and made the commitment to build out the infrastructure. That’s Verizon. Their FiOS passive optical fiber service has been moving into one community after another as a replacement for DSL, Satellite, and Cable. You can get bundles of phone, Internet and TV. Or, you can just get really fast Internet service at up to 50 Mbps download and 20 Mbps upload.

Did I say really fast internet service? Most people are getting somewhere between 3 and 10 Mbps broadband via DSL, Cable or wireless. But DOCSIS 3.0 is being rolled out on Comcast and other cable systems with 50 Mbps service offerings to rival fiber. The next tier will be 100 Mbps for those who can and will pay for it. DSL over copper telephone wire is going to struggle as the bandwidth wars speed past 100 Mbps. But there’s a new service on the horizon that will blow right past all of these broadband choices. It’s a 1 Gbps fiber optic service about to be launched as a pilot program by none other than Google.

Yes, some lucky consumers in the test markets are going to get their hands on the kind of bandwidth that makes IT managers green with envy. A Gigabit per second. That’s 1000 Mbps. There’s nothing over coaxial or twisted pair copper and certainly nothing wireless that can even come close to delivering that kind of consumer bandwidth. Even Verizon may have to change out a lot of terminal equipment to pump a Gbps into home networks.

Google swears that they are not planning to become a nationwide ISP. Their intention is to create an environment that can showcase the next developments in technology. What sort of cloud computing, virtual reality, telepresence, or HD 3D video applications need that kind of bandwidth? They’re yet to appear. But this does get past the chicken and egg conundrum, where application development stagnates because of bandwidth limitations and only cutting edge aficionados pony up for the top tiers in broadband service. Google plans to make their service cheap and plentiful so that even the common user can have a crack at this massive bandwidth connectivity.

ISP or not, it’s almost a sure bet that Google will prime the pump with some of their own cutting edge experimental apps. There’s probably all sorts of cool things brewing in the lab that just aren’t practical to launch on today’s broadband networks. Once the bottle’s open and the genies start flying out, you can bet that the development communities will fall all over themselves to get their own offerings out for evaluation.

This pitiful era of a bandwidth starved United States is about to end. That’s exceptionally good news for anyone living out in the boonies who’s stuck with dial-up, or paying a goodly price for satellite broadband and swearing at the latency. Google is, perhaps, the last straw in forcing universal fiber optic connections to the premises. Right now, smart telephone and cable companies are grabbing federal stimulus financing to trench fiber everywhere it isn’t already. It’s more than just serving the populations in low density areas who need and deserve better broadband. Another driving factor is the burgeoning wireless bandwidth demand to support smartphones, such as the iPhone and Droid. The cellular sites are bandwidth limited by the copper lines they have for backhaul. They are going to need fiber to support LTE and speed-ups in WiMAX.

How will wireless fare in the long run? It’s hard to tell how fast will be fast enough for wireless broadband. We’re not there yet. Right now, the relatively small size of cellphone screens takes some pressure off the need for massive bandwidth, even for HD video. But what about that iPad? It’s surely just the first in a whole class of tablet size products with bigger screens and more processing power. That’s going to lead to higher bandwidth demands to support content to feed the tablets. The FCC is already eyeing underutilized TV channels and other portions of the spectrum to press into service for wireless broadband. There will likely be some technology advances needed in the wireless arena to satisfy the ultimate need. After all, you can put more fiber bandwidth in the ground that there are Gbps in the entire regulated electromagnetic spectrum.

Click to check pricing and features or get support from a Telarus product specialist.




Follow Telexplainer on Twitter